Add hardware health and uptime reports

README.md

@@ -22,7 +22,8 @@ strixscripts/
 │   └── erase-storage.sh    презапис на дял или Secure Erase/Sanitize на диск
 ├── System/
 │   ├── network-diagnostic.sh подробна мрежова диагностика, топ 10 Wi-Fi мрежи и export
-│   └── system-report.sh     моментен системен отчет с TXT/JSON/HTML export
+│   ├── system-report.sh     моментен системен отчет с TXT/HTML export
+│   └── check-hardware-health.sh SMART здраве на дискове и температури на компонентите
 ├── Virtualisation/
 │   └── virtualisation-check.sh проверка на инсталирани виртуализационни решения и инстанции
 ├── Web/
@@ -64,6 +65,8 @@ strixscripts/
 - [`system-report.sh`](./System/system-report.md) — събира моментно състояние
      на системата, като групира Ethernet, Wi-Fi и виртуалните интерфейси, и
      предлага отчет във формат TXT, JSON или HTML.
+- [`check-hardware-health.sh`](./System/check-hardware-health.md) — проверява
+     SMART състоянието и типа на дисковете и предупреждава за високи температури.
 
 ### Virtualisation/
 

System/check-hardware-health.md

@@ -0,0 +1,52 @@
+# check-hardware-health.sh
+
+Проверява SMART състоянието и типа на физическите дискове, както и температурите на наличните хардуерни датчици. Проблемите се маркират с червен текст в терминала и с червен статус в HTML отчета.
+
+## Какво прави
+
+Скриптът показва времето от последното стартиране на системата, открива дисковете чрез `lsblk`, определя типа им по интерфейса и rotational флага (например PATA, SATA HDD/SSD и NVMe SSD), след което чете SMART данните чрез `smartctl`. При неуспешен SMART self-assessment или отчетен NVMe critical warning дискът се маркира като проблемен. Температурите се събират чрез `sensors -j`; за всеки датчик се използват предоставените от него прагове, а ако липсват — предпазни прагове по тип компонент. SMART температурата също се включва, когато е налична. При системи с батерия се показват зарядът, състоянието, циклите и здравето, изчислено от пълния спрямо проектния капацитет, когато тези стойности са налични.
+
+Отчетът се показва в терминала и може да се запише като TXT, HTML или JSON. За терминалния изход се използва ANSI червено, когато stdout е терминал и `NO_COLOR` не е зададен; TXT файлът съдържа ясни статуси, HTML отчетът оцветява проблемните редове в червено, а JSON файлът съдържа структурираните данни от проверката.
+
+При стартиране чрез `sudo` интерактивният път по подразбиране сочи към home директорията на извикалия потребител. Записаният файл получава неговите UID/GID, така че да остане достъпен за него след приключване на скрипта.
+
+## Изисквания
+
+- Linux, Bash, Python 3 и `lsblk` (задължителни)
+- `smartmontools` (`smartctl`) — незадължителен; без него SMART е „непроверено“
+- `lm-sensors` (`sensors`) — незадължителен; без него температурите от тези датчици не са налични
+- SMART достъпът до някои устройства може да изисква root права или подходящи права за `/dev`.
+- При стартиране без root права скриптът предупреждава, че SMART данните може да са непълни, и иска потвърждение преди проверките.
+
+## Употреба
+
+```bash
+./System/check-hardware-health.sh [OPTIONS]
+```
+
+| Опция | Описание |
+|-------|----------|
+| `-o`, `--output PATH` | Записва директно във файл; без тази опция предлага интерактивен запис |
+| `-f`, `--format FORMAT` | Формат `txt`, `html` или `json` |
+| `--force` | Позволява презапис на съществуващ файл без потвърждение |
+| `-h`, `--help` | Показва помощта и приключва |
+
+## Примери
+
+```bash
+# Проверява устройствата и предлага интерактивно записване
+./System/check-hardware-health.sh
+
+# Записва HTML отчет
+./System/check-hardware-health.sh --output "$HOME/hardware-health.html"
+
+# Записва HTML отчет и разрешава презапис
+./System/check-hardware-health.sh --output /tmp/hardware-health.html --format html --force
+
+# Записва структуриран JSON отчет; форматът се разпознава и по разширението
+./System/check-hardware-health.sh --output "$HOME/hardware-health.json"
+```
+
+## Ограничения
+
+Показват се само датчици, SMART атрибути и батерийни полета, предоставени от kernel, драйвера и устройството. Липсващ резултат не доказва, че компонентът е изправен. Батерийното здраве се оценява спрямо капацитетите full/design: под 80% е предупреждение, под 60% е критично; някои драйвери не предоставят цикли или капацитети. Прагът за температурно предупреждение обичайно идва от `sensors`; при липса на праг се използват 60 C за дискове, 85 C за CPU/GPU и 80 C за други компоненти. Това са общи предпазни стойности, не заместител на спецификацията на производителя. „PATA“ се разпознава само когато устройството е представено с традиционно `/dev/hd*` име без transport метаданни; при двусмислени данни отчетът използва обобщения тип от `lsblk`.

System/check-hardware-health.sh

@@ -0,0 +1,474 @@
+#!/usr/bin/env bash
+#
+# check-hardware-health.sh — report disk SMART health and hardware temperatures.
+# Full documentation: see check-hardware-health.md in this same folder.
+
+set -euo pipefail
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# shellcheck source=lib/common.sh
+source "${SCRIPT_DIR}/../lib/common.sh"
+
+SCRIPT_HELP=$(cat <<'HELP'
+Usage: ./System/check-hardware-health.sh [OPTIONS]
+
+Checks physical disks and their SMART health, reports device/media type,
+and reads component temperatures from lm-sensors when available. High
+temperatures and detected disk problems are highlighted in red in the report.
+
+Options:
+  -o, --output PATH   Save the report to PATH; otherwise ask interactively
+    -f, --format FORMAT Report format: txt, html, or json
+      --force         Overwrite an existing output file without prompting
+  -h, --help          Show this help message and exit
+
+Examples:
+  ./System/check-hardware-health.sh
+  ./System/check-hardware-health.sh --output "$HOME/hardware-health.html"
+    ./System/check-hardware-health.sh --output "$HOME/hardware-health.json"
+HELP
+)
+
+common::show_help_if_requested "$@"
+
+OUTPUT_PATH=""
+OUTPUT_FORMAT=""
+FORCE=0
+while [[ $# -gt 0 ]]; do
+    case "$1" in
+        -o|--output)
+            [[ $# -ge 2 ]] || common::die "$1 requires a path"
+            OUTPUT_PATH="$2"
+            shift 2
+            ;;
+        -f|--format)
+            [[ $# -ge 2 ]] || common::die "$1 requires txt, html, or json"
+            OUTPUT_FORMAT="${2,,}"
+            case "$OUTPUT_FORMAT" in
+                txt|html|json) ;;
+                *) common::die "unsupported report format: $2 (use txt, html, or json)" ;;
+            esac
+            shift 2
+            ;;
+        --force)
+            FORCE=1
+            shift
+            ;;
+        *) common::die "unknown argument: $1" ;;
+    esac
+done
+
+common::require_cmd python3
+common::require_cmd lsblk
+
+if [[ "$EUID" -ne 0 ]]; then
+    common::log "Warning: without root privileges, SMART data may be unavailable and not all checks will run."
+    common::confirm "Continue without root privileges?" || common::die "Hardware health check cancelled." 130
+fi
+
+python3 -c "$(cat <<'PYCODE'
+import datetime
+import html
+import json
+import os
+import pathlib
+import pwd
+import shutil
+import subprocess
+import sys
+import tempfile
+
+
+def run(command):
+    if shutil.which(command[0]) is None:
+        return None
+    try:
+        result = subprocess.run(command, capture_output=True, text=True, timeout=15)
+    except (OSError, subprocess.TimeoutExpired):
+        return None
+    return result.stdout
+
+
+def command_json(command):
+    output = run(command)
+    try:
+        return json.loads(output) if output else None
+    except json.JSONDecodeError:
+        return None
+
+
+def uptime_info():
+    try:
+        seconds = int(float(pathlib.Path("/proc/uptime").read_text(encoding="ascii").split()[0]))
+    except (OSError, ValueError, IndexError):
+        return {"seconds": None, "formatted": "Unavailable"}
+    days, remainder = divmod(seconds, 86400)
+    hours, remainder = divmod(remainder, 3600)
+    minutes = remainder // 60
+    return {"seconds": seconds, "formatted": f"{days}d {hours}h {minutes}m"}
+
+
+def disk_kind(device):
+    name = (device.get("kname") or device.get("name") or "").lower()
+    transport = (device.get("tran") or "").lower()
+    media = "HDD" if device.get("rota") is True else "SSD" if device.get("rota") is False else "storage"
+    if name.startswith("nvme") or transport == "nvme":
+        return f"NVMe {media}"
+    if name.startswith("/dev/hd") and not transport:
+        return f"PATA {media}"
+    if transport == "sata":
+        return f"SATA {media}"
+    return f"{transport.upper()} {media}" if transport else media
+
+
+def smart_check(path):
+    if shutil.which("smartctl") is None:
+        return {"status": "unavailable", "detail": "smartctl is not installed", "temperature": None}
+    output = run(["smartctl", "--json", "--all", path])
+    try:
+        data = json.loads(output) if output else None
+    except json.JSONDecodeError:
+        data = None
+    if data is None:
+        return {"status": "unknown", "detail": "SMART data unavailable; device may require elevated privileges", "temperature": None}
+
+    failures = []
+    passed = data.get("smart_status", {}).get("passed")
+    if passed is False:
+        failures.append("SMART overall-health self-assessment failed")
+    nvme = data.get("nvme_smart_health_information_log", {})
+    warning = nvme.get("critical_warning")
+    if isinstance(warning, int) and warning:
+        failures.append(f"NVMe critical warning: {warning}")
+    for attribute in data.get("ata_smart_attributes", {}).get("table", []):
+        flags = attribute.get("flags", {})
+        if flags.get("prefailure") and attribute.get("when_failed") not in (None, "", "-", "Never"):
+            failures.append(f"SMART attribute {attribute.get('name', attribute.get('id', 'unknown'))} failed")
+    temperature = data.get("temperature", {}).get("current", nvme.get("temperature"))
+    try:
+        temperature = float(temperature) if temperature is not None else None
+    except (TypeError, ValueError):
+        temperature = None
+    detail = "; ".join(failures) if failures else "SMART health passed" if passed is True else "SMART data has no overall health result"
+    return {"status": "failed" if failures else "passed" if passed is True else "unknown", "detail": detail, "temperature": temperature}
+
+
+def collect_disks():
+    data = command_json(["lsblk", "--json", "--bytes", "--paths", "--output", "NAME,KNAME,PATH,TYPE,ROTA,TRAN,MODEL"])
+    if not data:
+        return [], "Disk inventory unavailable."
+    disks = []
+    for device in data.get("blockdevices", []):
+        if device.get("type") != "disk":
+            continue
+        name = (device.get("kname") or device.get("name") or "").lower()
+        if name.startswith(("loop", "ram", "zram")):
+            continue
+        path = device.get("path") or device.get("name")
+        if path:
+            disks.append({"device": path, "model": (device.get("model") or "Unknown model").strip(), "kind": disk_kind(device), "smart": smart_check(path)})
+    return disks, None
+
+
+def sysfs_text(path):
+    try:
+        return path.read_text(encoding="utf-8").strip()
+    except (OSError, UnicodeError):
+        return None
+
+
+def numeric_value(value):
+    try:
+        return float(value)
+    except (TypeError, ValueError):
+        return None
+
+
+def collect_batteries():
+    batteries = []
+    for device in sorted(pathlib.Path("/sys/class/power_supply").glob("BAT*")):
+        if sysfs_text(device / "present") == "0":
+            continue
+        energy_now = numeric_value(sysfs_text(device / "energy_now"))
+        energy_full = numeric_value(sysfs_text(device / "energy_full"))
+        energy_design = numeric_value(sysfs_text(device / "energy_full_design"))
+        charge_now = numeric_value(sysfs_text(device / "charge_now"))
+        charge_full = numeric_value(sysfs_text(device / "charge_full"))
+        charge_design = numeric_value(sysfs_text(device / "charge_full_design"))
+
+        if energy_full is not None or energy_design is not None or energy_now is not None:
+            full_capacity, design_capacity, current_capacity, unit = energy_full, energy_design, energy_now, "uWh"
+        else:
+            full_capacity, design_capacity, current_capacity, unit = charge_full, charge_design, charge_now, "uAh"
+
+        charge_percent = numeric_value(sysfs_text(device / "capacity"))
+        if charge_percent is None and current_capacity is not None and full_capacity:
+            charge_percent = current_capacity * 100 / full_capacity
+        health_percent = full_capacity * 100 / design_capacity if full_capacity is not None and design_capacity else None
+        if health_percent is None:
+            reported_health = sysfs_text(device / "health")
+            lowered_health = (reported_health or "").lower()
+            health_status = "critical" if any(word in lowered_health for word in ("poor", "replace", "critical")) else "warning" if any(word in lowered_health for word in ("fair", "low")) else "unknown"
+        else:
+            health_status = "critical" if health_percent < 60 else "warning" if health_percent < 80 else "good"
+
+        batteries.append({
+            "name": device.name,
+            "manufacturer": sysfs_text(device / "manufacturer"),
+            "model": sysfs_text(device / "model_name"),
+            "status": sysfs_text(device / "status") or "Unknown",
+            "charge_percent": round(charge_percent, 1) if charge_percent is not None else None,
+            "cycle_count": numeric_value(sysfs_text(device / "cycle_count")),
+            "full_capacity": full_capacity,
+            "design_capacity": design_capacity,
+            "current_capacity": current_capacity,
+            "capacity_unit": unit if full_capacity is not None or design_capacity is not None or current_capacity is not None else None,
+            "health_percent": round(health_percent, 1) if health_percent is not None else None,
+            "reported_health": sysfs_text(device / "health"),
+            "health_status": health_status,
+        })
+    return batteries
+
+
+def fallback_limits(identity):
+    identity = identity.lower()
+    if any(word in identity for word in ("nvme", "drive", "disk", "composite")):
+        return 60.0, 70.0
+    if any(word in identity for word in ("gpu", "amdgpu", "nvidia", "junction", "hotspot")):
+        return 85.0, 95.0
+    if any(word in identity for word in ("cpu", "k10temp", "core", "package", "tctl", "tdie")):
+        return 85.0, 95.0
+    return 80.0, 90.0
+
+
+def valid_limit(value):
+    try:
+        value = float(value)
+    except (TypeError, ValueError):
+        return None
+    return value if 0 < value < 150 else None
+
+
+def collect_temperatures():
+    data = command_json(["sensors", "-j"])
+    if not data:
+        return [], "Temperature sensors unavailable (install/configure lm-sensors)."
+    readings = []
+    for chip, entries in data.items():
+        if not isinstance(entries, dict):
+            continue
+        for label, values in entries.items():
+            if not isinstance(values, dict):
+                continue
+            for key, raw in values.items():
+                if not key.startswith("temp") or not key.endswith("_input"):
+                    continue
+                try:
+                    current = float(raw)
+                except (TypeError, ValueError):
+                    continue
+                if not -20 <= current <= 150:
+                    continue
+                prefix = key[:-6]
+                high = valid_limit(values.get(prefix + "_max")) or valid_limit(values.get(prefix + "_high"))
+                critical = valid_limit(values.get(prefix + "_crit")) or valid_limit(values.get(prefix + "_emergency"))
+                fallback_warning, fallback_critical = fallback_limits(chip + " " + label)
+                warning = high or (critical - 5 if critical is not None else fallback_warning)
+                critical = critical or fallback_critical
+                if critical <= warning:
+                    critical = warning + 5
+                readings.append({"component": f"{chip} / {label}", "celsius": round(current, 1), "warning_limit": round(warning, 1), "critical_limit": round(critical, 1), "status": "critical" if current >= critical else "warning" if current >= warning else "ok"})
+    return readings, None
+
+
+def collect_report():
+    disks, disk_note = collect_disks()
+    temperatures, sensor_note = collect_temperatures()
+    batteries = collect_batteries()
+    for disk in disks:
+        value = disk["smart"]["temperature"]
+        if value is not None:
+            warning, critical = fallback_limits(disk["kind"])
+            temperatures.append({"component": disk["device"] + " SMART", "celsius": round(value, 1), "warning_limit": warning, "critical_limit": critical, "status": "critical" if value >= critical else "warning" if value >= warning else "ok"})
+    return {"generated_at": datetime.datetime.now().astimezone().isoformat(timespec="seconds"), "uptime": uptime_info(), "disks": disks, "temperatures": temperatures, "batteries": batteries, "collection_notes": [note for note in (disk_note, sensor_note) if note]}
+
+
+def has_problems(report):
+    return (
+        any(disk["smart"]["status"] == "failed" for disk in report["disks"])
+        or any(item["status"] in ("warning", "critical") for item in report["temperatures"])
+        or any(battery["health_status"] in ("warning", "critical") for battery in report["batteries"])
+    )
+
+
+def render_text(report, color=False):
+    red, reset = ("\033[31m", "\033[0m") if color else ("", "")
+    lines = ["HARDWARE HEALTH REPORT", "======================", f"Generated: {report['generated_at']}", f"System uptime: {report['uptime']['formatted']}", "", "DISKS / SMART", "-------------"]
+    if report["disks"]:
+        for disk in report["disks"]:
+            smart = disk["smart"]
+            style = (red, reset) if smart["status"] == "failed" else ("", "")
+            lines.append(f"  {style[0]}{disk['device']} | {disk['kind']} | {disk['model']} | {smart['status'].upper()}: {smart['detail']}{style[1]}")
+    else:
+        lines.append("  No physical disks found")
+    lines.extend(["", "COMPONENT TEMPERATURES", "----------------------"])
+    for item in report["temperatures"]:
+        style = (red, reset) if item["status"] in ("warning", "critical") else ("", "")
+        lines.append(f"  {style[0]}{item['component']}: {item['celsius']:.1f} C [{item['status'].upper()}; warning {item['warning_limit']:.1f} C, critical {item['critical_limit']:.1f} C]{style[1]}")
+    if not report["temperatures"]:
+        lines.append("  No temperature readings available")
+    lines.extend(["", "BATTERIES", "---------"])
+    if report["batteries"]:
+        for battery in report["batteries"]:
+            health = f"{battery['health_percent']:.1f}%" if battery["health_percent"] is not None else battery["reported_health"] or "Unavailable"
+            charge = f"{battery['charge_percent']:.1f}%" if battery["charge_percent"] is not None else "Unavailable"
+            cycles = str(int(battery["cycle_count"])) if battery["cycle_count"] is not None else "Unavailable"
+            model = f" | {battery['manufacturer'] or ''} {battery['model'] or ''}".rstrip()
+            style = (red, reset) if battery["health_status"] in ("warning", "critical") else ("", "")
+            lines.append(f"  {battery['name']}{model} | Charge: {charge} | State: {battery['status']} | Cycles: {cycles}")
+            lines.append(f"    {style[0]}Health: {health} ({battery['health_status'].upper()}){style[1]}")
+            if battery["full_capacity"] is not None and battery["design_capacity"] is not None:
+                lines.append(f"    Full/design capacity: {battery['full_capacity']:.0f}/{battery['design_capacity']:.0f} {battery['capacity_unit']}")
+    else:
+        lines.append("  No batteries detected")
+    if report["collection_notes"]:
+        lines.extend(["", "COLLECTION NOTES", *["  " + note for note in report["collection_notes"]]])
+    lines.extend(["", "OVERALL: " + ("PROBLEMS DETECTED" if has_problems(report) else "No reported SMART or temperature problems")])
+    return "\n".join(lines) + "\n"
+
+
+def render_html(report):
+    def esc(value):
+        return html.escape(str(value))
+    disk_rows = []
+    for disk in report["disks"]:
+        smart = disk["smart"]
+        status = "problem" if smart["status"] == "failed" else "unknown" if smart["status"] != "passed" else "ok"
+        disk_rows.append(f"<tr><td>{esc(disk['device'])}<small>{esc(disk['model'])}</small></td><td>{esc(disk['kind'])}</td><td class=\"{status}\">{esc(smart['status'].upper())}</td><td class=\"{status}\">{esc(smart['detail'])}</td></tr>")
+    temp_rows = []
+    for item in report["temperatures"]:
+        status = "problem" if item["status"] in ("warning", "critical") else "ok"
+        temp_rows.append(f"<tr><td>{esc(item['component'])}</td><td class=\"{status}\">{item['celsius']:.1f} C</td><td>{item['warning_limit']:.1f} C</td><td>{item['critical_limit']:.1f} C</td><td class=\"{status}\">{esc(item['status'].upper())}</td></tr>")
+    battery_rows = []
+    for battery in report["batteries"]:
+        health_class = "problem" if battery["health_status"] in ("warning", "critical") else "unknown" if battery["health_status"] == "unknown" else "ok"
+        charge = f"{battery['charge_percent']:.1f}%" if battery["charge_percent"] is not None else "Unavailable"
+        health = f"{battery['health_percent']:.1f}%" if battery["health_percent"] is not None else battery["reported_health"] or "Unavailable"
+        cycles = str(int(battery["cycle_count"])) if battery["cycle_count"] is not None else "Unavailable"
+        model = " ".join(value for value in (battery["manufacturer"], battery["model"]) if value)
+        battery_rows.append(f"<tr><td>{esc(battery['name'])}<small>{esc(model)}</small></td><td>{esc(charge)}</td><td>{esc(battery['status'])}</td><td>{esc(cycles)}</td><td class=\"{health_class}\">{esc(health)} ({esc(battery['health_status'].upper())})</td></tr>")
+    notes = "".join(f"<li>{esc(note)}</li>" for note in report["collection_notes"])
+    summary_class = "problem" if has_problems(report) else "ok"
+    summary = "Problems detected" if has_problems(report) else "No reported SMART or temperature problems"
+    return ("<!doctype html><html lang=\"en\"><head><meta charset=\"utf-8\"><meta name=\"viewport\" content=\"width=device-width, initial-scale=1\"><title>Hardware Health Report</title><style>"
+        ":root{color-scheme:light;--ink:#17242b;--muted:#5e7078;--line:#d7e1e3;--paper:#f2f6f5;--panel:#fff;--accent:#087e80;--red:#b42318;--green:#247044;--amber:#8a5a00}*{box-sizing:border-box}body{margin:0;background:var(--paper);color:var(--ink);font:15px/1.5 system-ui,sans-serif}main{max-width:1100px;margin:auto;padding:30px 20px 48px}header{border-bottom:2px solid var(--accent);padding-bottom:16px}h1{margin:0;font-size:28px}header p{color:var(--muted);margin:6px 0 0}section{background:var(--panel);border:1px solid var(--line);padding:18px;margin-top:14px}h2{margin:0 0 14px;font-size:18px}.table-wrap{overflow-x:auto}table{width:100%;border-collapse:collapse;text-align:left}th,td{padding:10px;border-bottom:1px solid var(--line);vertical-align:top}th{color:var(--muted);font-size:12px;text-transform:uppercase}small{display:block;color:var(--muted)}.problem{color:var(--red);font-weight:700}.unknown{color:var(--amber);font-weight:650}.ok{color:var(--green);font-weight:650}.summary{font-size:18px}@media(max-width:640px){main{padding:20px 12px 32px}section{padding:13px}}</style></head><body><main>"
+        f"<header><h1>Hardware Health Report</h1><p>Generated {esc(report['generated_at'])} · Uptime {esc(report['uptime']['formatted'])}</p></header><section><p class=\"summary {summary_class}\">{summary}</p></section>"
+        "<section><h2>Disks / SMART</h2><div class=\"table-wrap\"><table><thead><tr><th>Device / model</th><th>Type</th><th>SMART</th><th>Details</th></tr></thead><tbody>"
+        + ("".join(disk_rows) or "<tr><td colspan=\"4\">No physical disks found</td></tr>")
+        + "</tbody></table></div></section><section><h2>Component temperatures</h2><div class=\"table-wrap\"><table><thead><tr><th>Component</th><th>Current</th><th>Warning at</th><th>Critical at</th><th>Status</th></tr></thead><tbody>"
+        + ("".join(temp_rows) or "<tr><td colspan=\"5\">No temperature readings available</td></tr>")
+        + "</tbody></table></div></section>"
+        + "<section><h2>Batteries</h2><div class=\"table-wrap\"><table><thead><tr><th>Battery</th><th>Charge</th><th>State</th><th>Cycles</th><th>Health</th></tr></thead><tbody>"
+        + ("".join(battery_rows) or "<tr><td colspan=\"5\">No batteries detected</td></tr>")
+        + "</tbody></table></div></section>"
+        + (f"<section><h2>Collection notes</h2><ul>{notes}</ul></section>" if notes else "")
+        + "</main></body></html>\n")
+
+
+def ask(prompt, default):
+    try:
+        answer = input(f"{prompt} [{default}]: ").strip()
+    except EOFError:
+        return default
+    return answer or default
+
+
+def invoking_user_account():
+    sudo_user = os.environ.get("SUDO_USER")
+    if sudo_user:
+        try:
+            return pwd.getpwnam(sudo_user)
+        except KeyError:
+            pass
+    sudo_uid = os.environ.get("SUDO_UID")
+    if sudo_uid and sudo_uid.isdigit():
+        try:
+            return pwd.getpwuid(int(sudo_uid))
+        except KeyError:
+            pass
+    return pwd.getpwuid(os.getuid())
+
+
+def invoking_user_home():
+    return pathlib.Path(invoking_user_account().pw_dir)
+
+
+def save_report(path_text, format_name, force, interactive, report):
+    path = pathlib.Path(path_text).expanduser()
+    if not path.parent.is_dir():
+        raise OSError(f"output directory does not exist: {path.parent}")
+    if path.exists() and not force:
+        try:
+            overwrite = interactive and input(f"{path} exists. Overwrite? [y/N]: ").strip().lower() in ("y", "yes")
+        except EOFError:
+            overwrite = False
+        if not overwrite:
+            print(f"Report not written: {path} already exists.", file=sys.stderr)
+            return False
+    if format_name == "html":
+        content = render_html(report)
+    elif format_name == "json":
+        content = json.dumps(report, ensure_ascii=False, indent=2) + "\n"
+    else:
+        content = render_text(report)
+    temporary = None
+    try:
+        with tempfile.NamedTemporaryFile("w", encoding="utf-8", dir=path.parent, delete=False) as output:
+            temporary = pathlib.Path(output.name)
+            output.write(content)
+        sudo_uid = os.environ.get("SUDO_UID")
+        if os.geteuid() == 0 and sudo_uid and sudo_uid.isdigit():
+            account = invoking_user_account()
+            os.chown(temporary, account.pw_uid, account.pw_gid)
+        os.replace(temporary, path)
+    finally:
+        if temporary is not None and temporary.exists():
+            temporary.unlink()
+    print(f"Report saved: {path}")
+    return True
+
+
+def main():
+    output_path, requested_format, force_value = sys.argv[1:]
+    interactive = sys.stdin.isatty() and sys.stdout.isatty()
+    report = collect_report()
+    print(render_text(report, color=sys.stdout.isatty() and not os.environ.get("NO_COLOR")), end="")
+    if output_path:
+        suffix = pathlib.Path(output_path).suffix.lower().lstrip(".")
+        format_name = requested_format or (suffix if suffix in ("txt", "html", "json") else "txt")
+        saved = save_report(output_path, format_name, force_value == "1", interactive, report)
+        return 1 if not saved and not interactive else 0
+    if not interactive:
+        return 0
+    if input("Save this report to a file? [Y/n]: ").strip().lower() in ("n", "no"):
+        return 0
+    format_name = requested_format or ask("Report format (txt/html/json)", "txt").lower()
+    if format_name not in ("txt", "html", "json"):
+        print("Unsupported format; using txt.", file=sys.stderr)
+        format_name = "txt"
+    path = ask("Output path", str(invoking_user_home() / f"hardware-health.{format_name}"))
+    try:
+        save_report(path, format_name, force_value == "1", interactive, report)
+    except OSError as error:
+        print(f"Error: {error}", file=sys.stderr)
+        return 1
+    return 0
+
+
+try:
+    sys.exit(main())
+except OSError as error:
+    print(f"Error: {error}", file=sys.stderr)
+    sys.exit(1)
+PYCODE
+)" "$OUTPUT_PATH" "$OUTPUT_FORMAT" "$FORCE"

System/system-report.md

@@ -7,9 +7,10 @@
 
 ## Какво прави
 
-Отчетът включва hostname и домейн, архитектура и версия на дистрибуцията,
+Отчетът включва hostname и домейн, uptime, архитектура и версия на дистрибуцията,
 версия на kernel-а, моментно CPU натоварване, load average и обща/използвана/
-свободна RAM. За дисковете показва модел, тип носител и интерфейс, размер,
+свободна RAM. Uptime се чете от `/proc/uptime` и се показва в секунди в JSON,
+както и в четим формат в TXT и HTML. За дисковете показва модел, тип носител и интерфейс, размер,
 дъщерни файлови системи, mount points и използвано място. Диск без mount point
 и без установен swap се маркира като „Not mounted and not in use“.
 

System/system-report.sh

@@ -184,6 +184,17 @@ def load_average():
         return None
 
 
+def uptime_info():
+    try:
+        seconds = int(float(pathlib.Path("/proc/uptime").read_text(encoding="ascii").split()[0]))
+    except (OSError, ValueError, IndexError):
+        return {"seconds": None, "formatted": "Unavailable"}
+    days, remainder = divmod(seconds, 86400)
+    hours, remainder = divmod(remainder, 3600)
+    minutes = remainder // 60
+    return {"seconds": seconds, "formatted": f"{days}d {hours}h {minutes}m"}
+
+
 def parse_json_command(command):
     output = run(command)
     if output is None:
@@ -526,6 +537,7 @@ def collect_report():
     network_mounts, mount_note = collect_network_mounts()
     return {
         "generated_at": datetime.datetime.now().astimezone().isoformat(timespec="seconds"),
+        "uptime": uptime_info(),
         "host": {"hostname": host, "fqdn": fqdn, "domain": domain},
         "operating_system": {
             "name": os_name,
@@ -567,6 +579,7 @@ def render_text(report):
         f"  Hostname: {value_or_unavailable(host['hostname'])}",
         f"  Domain: {value_or_unavailable(host['domain'])}",
         f"  FQDN: {value_or_unavailable(host['fqdn'])}",
+        f"  Uptime: {value_or_unavailable(report['uptime']['formatted'])}",
         "",
         "OPERATING SYSTEM",
         "-----------------",
@@ -679,6 +692,7 @@ def render_html(report):
         f"<dt>Hostname</dt><dd>{esc(host['hostname'])}</dd>",
         f"<dt>Domain</dt><dd>{esc(host['domain'])}</dd>",
         f"<dt>FQDN</dt><dd>{esc(host['fqdn'])}</dd>",
+        f"<dt>Uptime</dt><dd>{esc(report['uptime']['formatted'])}</dd>",
         f"<dt>Operating system</dt><dd>{esc(os_info['name'])}</dd>",
         f"<dt>Version</dt><dd>{esc(os_info['version'])}</dd>",
         f"<dt>Architecture</dt><dd>{esc(os_info['architecture'])}</dd>",